Datasheet
pdf 0.17 MB
Joist Hanger
JH
Joist Hanger
£0.00
The Joist Hanger is a stainless steel support that enables the installation of aluminium joists onto an existing steel-framed balcony, ideal for replacing timber joists. aluminium joists are hung between the steels, enabling the top of the joist to be flush with the steel frame.
- Secured to steel with Tek screws
- Compatible with the DS aluminium Joist
- Easily installed at customisable intervals
- Allows for height adjustment of joists
Details
| Material | Stainless Steel A2 |
|---|---|
| Dimensions | See “Part information” below |
| Weight | See “Part information” below |
| Joist width capacity | See “Part information” below |
Performance
| Reaction to fire (BS EN 13501-1) | Inherently A1 (Decision 94-611/EC) |
|---|---|
| Allowable load | Uniformly distributed >4.0kN/m², Concentrated 2kN |
| Warranty | 30 years* |
| Design life | 60 years |
*when used as part of a complete RYNO system
Part information
| Code | Dimensions | Weight | Joist width capacity |
|---|---|---|---|
| JH50 | Dimensions: 110 x 54 x 100mm | Weight: 246g | Joist width capacity: 50mm |
| JH75 | Dimensions: 110 x 79 x 100mm | Weight: 327g | Joist width capacity: 75mm |
Download
How to Order?
For help with ordering products, or for any other guidance regarding your project please contact Ryno on:
Request a Call
Or enter your details below if you would like us to contact you.
