Datasheet
pdf 0.37 MB
RHF-WU - Rail Wind Uplift Restraint - Hidden Fixing
RHF-WU
Rail Wind Uplift Restraint – Hidden Fixing
£0.00
The Rail Wind Uplift Restraint – Hidden Fixing is a specialist stainless steel component that acts as an invisible wind uplift restraint when paired with the RST Aluminium Paving Support Rail and RYNO® kerfed porcelain pavers. The retained washer and screw head sits in the kerf of the porcelain, the bottom washer locks into the RST rail, while the machine screw secures the two together. Enabling straightforward installation, the innovative component provides access to the screw to enable removing and replacing of tiles in the event of damage, the retaining washer keeping the upper part elevated until it’s in place and ready to be tightened.
- Hidden fixing for a seamless appearance
- Facilitates removal and replacement of tiles
- Stainless steel A2, blackened for a super discreet detail
Details
| Material | Stainless Steel A2, blackened |
|---|---|
| Dimensions | M3x25mm |
| Drive type | Torx (T10) |
| Spacer tab thickness | See “Part information” below |
Performance
| Cyclic wind load testing (EOTA Technical Report TR005:2003) | Product tested to a maximum of 6000 Pascals (6kPa) in pulsed cycles. No detrimental effects to any of the systems were found and no failures were observed during testing. Tested in accordance with EOTA Technical Report TR005:2003. Test report available on request. |
|---|---|
| Performance - Reaction to fire (BS EN 13501-1) | Inherently A1 (Decision 94-611/EC) |
| Biological and chemical | Resistant to moulds, algae, alkali, bitumen, UV |
| Warranty | 30 years* |
| Design life | 60 years |
*when used as part of a complete RYNO system
Download
How to Order?
For help with ordering products, or for any other guidance regarding your project please contact Ryno on:
Request a Call
Or enter your details below if you would like us to contact you.
